|
|
Hydrogels with incorporated enzymes
Geistová, Karolína ; Krouská, Jitka (referee) ; Mravec, Filip (advisor)
This bachelor thesis deals with the study of incorporation of enzymes into phase separated hydrogels. The aim of this work is to determine the enzyme activity in phase separated gels. Gels were prepared by the dry-way based on the interaction of negatively charged polyelectrolyte (hyaluronan) with positively charged surfactant (Septonex). Two enzymes, bromelain and collagenase, were incorporated into the hydrogels. To determine enzyme activity, the modified albumin protein with bound sulfanilamide group (azoalbumin) was used as a substrate. The enzyme activity of the enzyme itself, the enzyme activity affected by one of the two components of the system as well as the activity of the enzyme directly in the hydrogel was determined on UV-VIS spectrophotometry. The enzyme was found to be incorporated in the hydrogel. Furthermore, a significant effect of the positively charged surfactant on the enzyme activity was detected in phase-separated hydrogels.
|
|
|
Optimization of extraction of pigments from yeast and algae cells
Šimanský, Samuel ; Mikulíková, Renata (referee) ; Márová, Ivana (advisor)
The presented diploma thesis deals with the extraction and storage stability of lipophilic pigments produced by selected strains of yeasts and algae. In this thesis, there was studied the influence of the selected solvents on the efficiency of extraction, as well as the effect of ambient temperature on the stability of the pigments during storage. The work is divided into two main parts, theoretical and practical part. In the theoretical part knowledge about algae, yeasts and their cultivation parameters is summarized. Furthermore, some information regarding the selected lipid metabolites, their properties and possibilities of application in various branches of industry is mentioned. The practical part deals with the preparation of extracts and stability tests. Extracts were prepared from selected biomass samples in solvents suitable for applications in food industry or cosmetics (ethanol and hexane). Subsequently, the long-term stability tests lasting 4 months and short-term stability tests lasting a total of 28 days were performed on these extracts. The pigments were determined by HPLC and spectrophotometrically, the fatty acid content was determined by GC. For the extraction of pigments from biomass, in the most cases ethanol appears to be the optimal solvent. However, for lipid extraction from biomass, hexane appears to be the optimal solvent for a significant number of samples. In most samples, storage in the freezer showed the most favourable effect on pigment stability, but some samples showed comparable stability even when stored in the refrigerator.
|
|
|
Use of biomaterials for optoelectronic applications in semiconductor technology
Čuboň, Tomáš ; Salyk, Ota (referee) ; Zmeškal, Oldřich (advisor)
The bachelor´s thesis is aimed to measurement optical properties of thin layer films of biomaterials which could be used in optoelectronics and semiconductor technology. DNA and BSA were chosen in order to represent such extensive group of biomaterials. The theoretical part describes the way of preparation of thin layer. It also provides some information about basic phenomena and biomaterials. The practical part is focused on the description of preparation of thin layer film using spin-coating method. The chosen materials were studied by optical microscopy, UV-VIS spectrophotometry and spectroscopic ellipsometry. The thickness of prepared samples was measured by mechanic profilometry. In the last section of the bachelor´s thesis, there is discussion and evaluation of results.
|
|
|
Study of surface water quality in the Ivančice area
Jonášová, Simona ; Řezáčová, Veronika (referee) ; Komendová, Renata (advisor)
Selected physical and chemical water quality parameters were measured at four sampling localities on the Jihlava River. Using UV-VIS spectrophotometry, inorganic forms of nitrogen, chlorides, total phosphorus and CODCr were determined. BOD5 was determined by the dilution method. Na+, K+ and Ca2+ ions, whose concentrations ranged from 5,75–108 mgl 1, were measured by flame emission photometry. Selected metals (Cu, Ni, Pb, Zn, Hg, Cr, Fe, Mn) were determined in water by the ET-AAS method. Decomposed sediments were determined by the FAAS method. Concentrations of Cr, Cu, Pb and Ni in water were in the range of 0,05–2,84 gl1. Metal concentrations in sediments ranged from 0,02–293 mgkg1, where nickel concentrations were above the limit. The occurrence of iron and manganese is due to the geological subsoil. For the other elements, anthropogenic source is assumed. From the measured data, the water quality is slightly variable in this locality and is classified as fourth or fifth class, i.e. as highly polluted water.
|
|
|
Bioactive compounds of fennel
Nentvichová, Aneta ; Vespalcová, Milena (referee) ; Veselá, Mária (advisor)
The aim of this bachelor thesis is to study the bioactive substances contained in fennel, to determine the content of polyphenols, flavonoids and to investigate the antioxidant and antimicrobial activity in aqueous and ethanol extracts of fennel. The theoretical part discusses the characteristics of fennel, its classification in the system, its use and especially the bioactive substances contained in it. The experimental part is divided into two sections, where the first part focuses on spectrophotometric determination of polyphenols, flavonoids and antioxidant activities. In the second part the antimicrobial effects of prepared extracts of fennel were examined. Two microorganisms Serratia marcescens and Bacillus cereus were exposed to the said extracts. Antioxidant activity and relatively high content of polyphenols and flavonoids were found in the extracts in the first experimental part. The second experimental part proved that the antimicrobial effect of the extracts was very low, in most cases almost negligible. Ethanol extracts showed higher antimicrobial activity, while hot water extracts found to support the growth of Bacillus cereus.
|
|
|
Caffeine degradation by high frequency discharge in solutions
Korečková, Svatava ; Mravcová, Ludmila (referee) ; Kozáková, Zdenka (advisor)
The bachelor thesis deals with the degradation of caffeine in solutions by a high frequency discharge generated directly in the solution. The influence of experimental conditions such as the initial pH and conductivity of the solution, caffeine concentration or electrode geometry was studied. The prepared caffeine solutions had a concentration of 10–100 ppm and their initial pH was adjusted with electrolytes (NaCl, Na3PO4, Na2HPO4 and NaH2PO4). All experiments were performed in a batch plasma reactor consisting of a 400 ml beaker and two electrodes. UV-VIS spectrophotometry was used to determine the amount of degraded caffeine. It was found that the experimental conditions (electrical conductivity, power, type of electrode used, electrolyte used) have an effect on the degradation of caffeine. The most suitable electrolyte appears to be NaCl and the initial specific electrical conductivity set in the range of 400–500 S·cm–1.
|
|
|
Solubilization in catanionic surfactant systems
Konečná, Anna ; Krouská, Jitka (referee) ; Mravec, Filip (advisor)
This bachelor thesis deals with the solubilization of hydrophobic dyes in systems of positively charged catanionic vesicles. The aim of the work was to determine their solubilization capacity. Vesicular systems were prepared from oppositely charged surfactants CTAB and SDS. To increase the stability of the vesicles, cholesterol and the positively charged double-chain surfactant DODAC were added to their structure. DODAC also gave the system a positive charge. To determine the solubilization capacity, the dyes 1-Naphthol, Sudan Red G and Oil Red O were used. For sample preparation two methods were used, spontaneous and direct solubilization. The measurement was performed after 1, 2, 3 and 7 days from the preparation of the samples by UV-VIS spectrophotometry. The solubilization capacity was determined from the measured absorbance by calculation from the calibration curves. The results indicate that direct solubilization is slightly more effective than spontaneous solubilization. Of the selected dyes, 1-Naphthol is the substance with the smallest molecule, and therefore it seems to be 100% solubilized in the vesicle system.
|
|
|
Microdetermination of cobalt by methods of molecular and atomic absorption spectrometry
Charuza, Martin ; Řezáčová, Veronika (referee) ; Sommer, Lumír (advisor)
This diploma thesis is focused on microdetermination of cobalt by UV-VIS spectrophotometry with organic agents and comparison with atomic absorption spectrometry. In the first part properties, occurance and importance of cobalt in the environment are desribed, complete with as a part of vitamine B12. Attention is also given to cobalt compounds, especially in the oxidative states +II and +III. Methods of preconcentration and preparation cobalt determination in real samples are adduced. In this thesis are described some optical analytical methods with accept on spectrophotometric agents for determination of cobalt. The experimental part of this thesis icludes optimalization of the spectrophotometric determination of cobalt with choosen organic agents 4-(2-pyridylazo)resorcin and 2-(5-Brom-2-pyridylazo)-5-diethylaminophenol and optimalization of atomic absorption spectrometry for cobalt determination. All of real samples of water (surface, underground, mineral and waste) were measured by both 4-(2-pyridylazo)resorcin and 2-(5-Brom-2-pyridylazo)-5-diethylaminophenol via UV-VIS and via atomic absorption spectrometry. Results of determinations were compared. A sample of vitamine B12 was measured too by all techniques.
|
|
|
Interactions of humic hydrogels with cupric ions
Lang, David ; Gregorová, Eva (referee) ; Klučáková, Martina (advisor)
This diploma thesis deals with humic acid gels and their ability to bind metallic ions on their surface. In the thesis, there was studied the adsorption of copper ions on the provided gels. The gels were prepared by dissolving the humic acid in sodium hydroxide or sodium tripolyphosphate and then precipitated with hydrochloric acid or metal chlorides. Adsorption was studied at different concentrations of the copper (II) chloride and measured on UV-VIS spectrophotometer. It was proved from measuring that gels made from sodium tripolyphosphate are adsorbing less copper ions than the ones prepared by sodium hydroxide. Also, the copper ions are bound with smaller force on gels prepared with polyphosphate. Gels precipitated with magnesium chloride adsorb much more than gels precipitated with acid, thus in the case of gels sequestered metal ions extracted higher.
|
|
|
Hydrogels based on microemulsions and polyelectrolytes
Růžičková, Kristýna ; Kalina, Michal (referee) ; Mravec, Filip (advisor)
This bachelor thesis deals with preparation and characterization of microemulsion based phase separated hydrogels while using low molecular weight and high molecular weight hyaluronan. Microemulsions were prepared from canola oil, sunflower oil, lemon oil and tea tree oil. As a dye for studies of behaviour of hydrogels was used Oil red O which simulates hydrophobic drug. The main part of this thesis studies the release of this dye from hydrogels by using UV-VIS spectroscopy. The content of the dye in hydrogels was monitored after 24, 48 and 72 hours. Based on measured data we can state that hydrogel prepared from low molecular weight hyaluronan release bigger amount of the dye than hydrogel from high molecular weight hyaluronan. Based on measured data after 72 hours we can say that hydrogel from microemulsion with tea tree oil and hydrogel from microemulsion with lemon oil released bigger amount of the dye than hydrogel without microemulsion. Another advantage of these two hydrogels is increased thougness. Content of sunflower and canola oil indicated rather negative influence on behaviour of hydrogels.
|
guest ::
